In-situ floor finishes: ACM Epoxy SLACM Epoxy SL is a high-performance epoxy-resin flooring system, typically applied at 2 to 5mm. This provides a hygienic,
dust-free floor with excellent mechanical and chemical resistance. The system is widely used on industrial and commercial floors in laboratories, schools, plant rooms, factories, engineering workshops, hospital clean rooms and many more applications. The finished floor is glossy, seamless and completely impermeable. A 2mm thickness of ACM Epoxy SL will provide many years of working life in industrial environments.
A slip-resistant texture may be achieved by either broadcasting flakes into the wet screed or by applying a coat of ACM Epoxicote broadcast with aggregate.
Composition and manufacture
Epoxy-resin binder with specialist aggregate; solvent free. Manufactured to ISO 9001.
Coverage
Available in 20.5kg units covering 5.5m2 at 2mm thickness. For estimation purposes, approximately 1.85kg/m2 per mm thickness should be allowed, although this may vary according to surface conditions and wastage.
Appearance
ACM Epoxy SL is available in a range of colours including Tile Red, Mid Green, Mid Blue, Light Grey, Mid Grey, Dark Grey and Buff.
Performance
Good impact, chemical and abrasion resistance.
Sitework
Advice and specifications can be obtained from the technical department. Suitable subfloor preparation must be undertaken prior to application; contact manufacturer for further information.